The device looked like this initially (the top and bottom covers were missing):
The leftmost card is missing (it was already removed). The display is at the front.
From this position I am numbering the cards from left to right, starting at 1 and ending at 21. Card position 19 is empty (there is a slot on the front rails but not at the end). After removing all cards we are left with the empty chassis with number markers for all cards:
In the empty chassis picture you can see the bottom card mount being crooked; in fact its screws were missing, and it is slightly bent.
I removed all cards first, and wrote down all connections from card to card. For this I number all gold coax-like connectors on each card starting at 1 for the topmost one, and going downwards. Some cards have connectors in odd places so these are marked as such..
The device contained the following cards:
# | Code | Description |
|---|---|---|
1 | A18 BD AY Regulator | |
2 | ||
3 | 66523 | |
4 | 66526 | |
5 | 66527 | |
6 | 66528 | |
7 | 66526 | |
8 | 66527 | |
9 | 66528 | |
10 | 66526 | |
11 | 66527 | |
12 | 66528 | |
13 | 66526 | |
14 | 66527 | |
15 | 66528 | |
16 | 66554 | |
17 | 66552 | |
18 | 66555 | |
19 | Empty | |
20 | 66552 |
The power supply contained the following boards:
# | ||
|---|---|---|
1 | 8160-61101 | |
2 | 8160-66512 | Burn marks |
Add Comment