Wire schema
Colors | Type | Resistance |
---|---|---|
Orange | Sense? Runs all cores diagonally | 17 ohm |
Blue | Inhibit? Runs all cores diagonally | 11.51 ohm |
Yellow | Address X | 1.98 ohm |
Green | Address Y | 2.01 ohm |
To be able to put sufficient current in the X and Y wires I built a simple full bridge amplifier:
(replaced the lm358 with an ne5532 for better frequency response).
which will receive a signal from my signal generator so that we can see the cores flip with a bit of luck.
To receive the signal from the sense wire I used another opamp with a 20x amplification so that I can amplify it before it goes to the oscilloscope.
Add Comment